GD-20 type Sheet Chamfering Machines
This sheet-chamfering machine uses the roller cutting principle，so that it can cut the steel sheet plates in the required width and get the needed chamfer for welding．It features accurate size，clean surface，one-time shaping，and no need for cleaning burrs，convenient operation，high operating efficiency(3m/minute)，and low ene rgy consumption．
Type |
GD-20 |
steel plate tensile strength |
<400 |
>400～500 |
>500～600 |
Steel sheet |
A3 steel plate |
16Mn steel plate |
ICrl 8Ni9ri steel plate |
W(mm)max．width |
20 |
1 6 |
1 2 |
V(m/min)feeding speed |
～2 9 |
～3.1 |
～3.4 |
(a°)Chamfer degree |
25～55 |
e(mm)Min straight line |
2 |
h(mm)max．thickness |
45 |
(mm)diameter of knife |
200 |
main motor type |
Y112M-4 4KW/1440r/min |
Overall dimension(L×W×H) |
1240×940×1500 |
|
